Free sample kit · ships Australia-wide
Trade resourcesFind a dealer1300 132 787
MagnaSpan MGO Flooring & Cladding
Spec sheetsGet a quote
Home/Products/MagnaFloor
MagnaFloorMGO Flooring · 12, 18 & 33mm

Built to last.
Designed to inspire.

Tongue-and-groove MGO floor panel in 12, 18 and 33mm. Waterproof, fire-resistant and dimensionally stable — the same panel under tile, vinyl, carpet or timber flooring.

MagnaFloor panel
12 / 18 / 33mmThickness options
T&G edgeTongue-and-groove
600mmSheet width
Class A1Non-combustible
Sizes & weights

Pick your thickness.

All three options are in stock at the Silverdale warehouse. Mix-and-match on a single delivery.

ThicknessSizeKgm2SheetKgUse
12mm600 × 2400mm11.5 kg/m²~16.6 kgTimber frame · vinyl or carpet finish
18mm600 × 2400mm17.3 kg/m²~24.9 kgSteel frame · tile or stone finish
33mm600 × 2400mm31.7 kg/m²~45.7 kgHigh-load · commercial flooring
In the field

Installed by real builders.

Tongue-and-groove edge detail
Edge profile

Tongue-and-groove. No gaps. No movement.

The T&G edge locks adjacent panels together before the screw goes in. No bridging, no hollow points, no grout cracking after six months.

  • Eliminates panel-edge deflection
  • Works under tile, LVP, carpet and hardwood
  • Score-and-snap cut in under 20 seconds
  • No silicone joint required at butt joints
Third-party certified

Tested by Intertek. Not a number on a brochure.

Every claim on this page has a test certificate behind it. Fire, moisture, chloride content, bending strength — all independently verified by Intertek before a single sheet ships.

Download the test reports
A1Fire class (EN 13501-1)
18 MPaBending strength dry
0.032%Chloride content (ASTM C871)
ZeroWater penetration (CNS 13778)
Moisture & stability

Lay it down. Walk away. Come back in six weeks.

MGO doesn't swell, bow or delaminate when moisture gets in. Lock it down on a Friday, flood it on the weekend, tile it Monday. The panel doesn't care.

  • No penetration under CNS 13778 water permeability test
  • Suitable for wet areas: bathrooms, laundries, kitchens
  • Dimensional stability — no seasonal movement
  • Mould and bacteria resistant core
MagnaFloor in a wet area bathroom
Installation

Four steps. Half a day.

Full install guide in the Resources library.

01

Inspect the deck

Check joists are level, dry and within span tolerance. Clear any debris — MGO doesn't forgive hollow spots.

02

Score and snap

No power tools required. Score with a Stanley knife, snap over a straight edge. Two cuts per sheet, both in under a minute.

03

Lay and screw

T&G joints interlock first. Fix at 200mm centres with 10-gauge Type 17 screws. Two people can floor a standard bedroom in three hours.

04

Hand it over

Clean, level, fire-rated floor ready for any finish. No drying time, no membrane, no waiting.

Free sample kit

Score it. Snap it. Soak it.

A 300 × 300mm offcut of MagnaFloor, a fastener pack and the install card. Free, ships in three business days.